Text Projector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating multicolor text projected on wall.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Target of the project:
- Rotating text
- Multicolor
- easily change the text
You need:
- arduino
- 5V stepper motor
- rgb bulb
- https://www.amazon.fr/gp/product/B07QZ2T297/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
- bulb stand https://www.amazon.fr/gp/product/B01I1THV0I/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
- Fresnel Lens https://www.amazon.fr/gp/product/B06W5FCS4Q/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
- mirror https://www.amazon.fr/gp/product/B09V6N62YN/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
- ACDC converter 5V https://www.amazon.fr/gp/product/B08KH82YK1/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
As you can see I have try to do also a mirror to project to 90° on a wall instead of the roof.
The screw on the side are there to adjust the height to have a perfect image.
The text is printed on a small part, print quickly and exchangeable easily
The result is not so bad, but the light is not bright enough.
I have try with a more powerful bulb (https://www.amazon.fr/gp/product/B07BT6RCSN/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1), it was much better, but the heat generated has melt the PLA :(
If somebody wants to improve and maybe try to print it with a more tough heat material, it would be fine to test if it works.
Maybe also add a heat exchanger or a fan..