ZE Sindoh 3 inch Spool Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to allow 3 inch wide spools to fit inside your Sindoh DP200, 3DWOX 1 and 1X 3D Printers.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With the new wider cardboard spools showing up on the market from Polymaker or 3DXTech’s 3 inch wide spools, they are simply too wide for our DP200, 3DWOX 1's and 1X's 3D Printers.
So, over a weekend I designed these two spacers that do not require any additional hardware that simply snap in place. However, you will need to trim the side panels to allow for those extra wide spools from rubbing against the panel ribs and for the spacers to fit.
P.S.
Check out our Facebook support group for Sindoh 3D Printer users and if you need spare parts or consumables, check out the link below:
FB Sindoh 3D Printer User Support Group: https://www.facebook.com/groups/593946721288877/
Spare Parts & Consumables: https://www.zacariasengineering.com/?category=3D+Printers+%26+Parts