Chip Clip remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added some recesses for 2mm magnets (2 for the small, 4 for the med and large) to srwilson58's original clip. htt These…
- Ocena
- 4,765 / 5
- Polubienia
- 141
- Pobrania
- 2267
- Wydruki
- 20
- Wyświetlenia
- 5134
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Added some recesses for 2mm magnets (2 for the small, 4 for the med and large) to srwilson58's original clip. These work great for chips, candy, or just about anything else. Adding the magnets allows mine to be stored on my fridge for easy access.
Original designer https://www.thingiverse.com/thing:1212828
I used these magnets from Apex https://www.apexmagnets.com/magnets/2mm-x-2mm-cylinders-neodymium-magnet
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
200
Infill:
35
Filament: MatterHackers PLA Lt Blue Post-Printing =============
Used a heat gun to "open" the recess a little and gently set the magnets in with a non-ferrous tool (I used a bamboo skewer [very handy when dealing with magnets]). Lastly, I covered the magnets with instant glue to seal them in (just as an extra precaution).
Category: Household Supplies