Cable hook with snap clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable hook to route cable on walls , boards
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 342
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
These hooks are quick to print and easy to use. I printed them for the ip cam cables outside my house. Can be used indoors as a wall hook or to manage cables.
The hole diameter is approx 8mm , so any wall screw size 5-8 can be used to mount these clips.
The clip can be printed without support, if its placed on one side as shown in the cura screenshot.
I printed mine using PETG 0.3mm layer height and a 0.6mm nozzle and set wall count as 3. Increase the wall count if using a 0.4mm nozzle so that the part stays sturdy.
These hooks have a snap closure, if you are interested in a version without snap closure , please refer to my other design : https://www.printables.com/model/298113-cable-hook-mk1