Vacuum Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for a vacuum pen, for manual SMD assembly. It is inspired by a holder for a soldering iron.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a holder for a vacuum pen, for manual SMD assembly. It is inspired by a holder for a soldering iron. No special requirements apply for a vacuum pen holder, because (unlike a soldering iron) it does not get hot.
There is an option in the OpenSCAD file to have a hollow section in the middle of the base plate, to add a block of iron or steel for a bit of weight. To use it, you should add a pause just before the layer that closes the hollow section (so you can add the weight before continuing the print).
The suction tips are fairly universal in dimensions, but the vacuum pen itself may not be. My pen is 10mm in diameter. I added a print file for a pen with a 12mm diameter as well. The OpenSCAD file allows for extensive configuration, of course.
Print instructions
This model can be printed with PLA, PETG or any material. No supports are needed (amazingly).