Pendant Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular pendant lamp that can easily be modified by adding, subtracting, and playing with different shapes…
- Ocena
- 0 / 5
- Polubienia
- 91
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a modular pendant lamp that can easily be modified by adding, subtracting, and playing with different shapes and colors.
It uses a "common" 40mm socket, canopy, and cord set found on Amazon, Ikea, eBay, and others. Example Links Below.
The design uses four primary printed pieces:
Translucent Top, Center, Bottom.
Colored Halo (120mm, 140mm, 160mm, 180mm included)
The translucent sections are designed to friction fit together. A dab of adhesive could be used for a more permanent fit. Additionally an unfinished untested twist lock design is included to experiment with.
Parts Used.
Pendent Finish Kit: https://www.amazon.com/gp/product/B000WEMHF0/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
T10 8 watt LED bulb: https://www.amazon.com/gp/product/B07FQF1XBK/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Other Sources (Untested)
Ikea Cordset: https://www.ikea.com/us/en/p/hemma-cord-set-white-10175810/
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Nothing Specific PLA / PLA+ Makers Choice Post-Printing =============
Do Not Use Incandescent Lamp!
It will get too hot, start a fire, and kill everyone!
No Joke!
If you use this design do so wisely at your own risk.
Enjoy!
Category: Decor