Filament Spool Holder - Adjustable Roller Style - Easy Print - For Bambu Lab AMS Rollers ONLY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTICE: This spool holder is for use with the rollers from the Bambu Lab AMS unit only.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 148
- Wydruki
- 2
- Wyświetlenia
- 2758
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you find this thing useful, please consider sending a tip. :)
https://paypal.me/cdsmakestuff
https://www.venmo.com/u/cdsmakestuff
Filament Spool Holder - Roller Style
NOTE: You must have (or get) the Bambu Lab AMS rollers for this to work.
Easy to print and assemble
Adjustable version for different size spools
Max spool size - 72mm wide x 200mm diameter
Min spool size - 150mm diameter
--------HARDWARE---------
Bambu Lab AMS rollers - x2
Glue (super glue, gloop, epoxy, whatever works)
10mm Non-Skid Self Adhesive Silicone or Rubber Pads - x4
--------PRINTED PARTS-------
Sides
Ends
--------TIPS / INFO--------
Print settings (recommended min. w/ 0.4mm nozzle) - PLA - 3 walls, 4 bottom, 4 top, 20% infill.
You may or may not need to glue the sides to the end pieces depending on fitment… I preferred to glue them wanting a permanent joint.