1 / 2
Multiple Styles of Schrader Caps, Tire Valve Cap for Cars, Bikes, Carts, Etc.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Schrader valve caps optimized for 3D printing.
- Ocena
- 4,961 / 5
- Polubienia
- 1662
- Pobrania
- 3708
- Wydruki
- 82
- Wyświetlenia
- 14 787
- Oceny
- 51
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 82) (Komentarze: 86)Remiksy (3)Kolekcje (1976)Powiązane
From left to right on 2nd image;
1: Round Top
2: Flat Top
3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions
6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces out)
7: Manufactured Cap for Reference
All files are oriented for optimal printing, Caps use between .75-1g of filament each.
Print Settings:
Recommend to print in PTEG as PLA isn't as outdoor resistant. .6mm nozzle, .2mm layer height. Should print fine with a .4mm nozzle.
