1 / 3
Catch for Electrolux Z 65 vacuum cleaner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement catch for Electrolux Z 65 vacuum cleaner
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement catch connecting the lid with the tank of the Electrolux Z 65 vacuum cleaner.
Print settings:
- Layer height: 0.3 mm
- Perimeters: 3
- Solid layers - top/bottom: 9 / 9
- Infill: 20 %
- Supports: no
The catch on photo was printed from PLA as a test part to see how it fits. The final part was intended to use PETG. For the past year, the test part has performed so well that there was no reason to print it with PETG.