Raspberry PI Camera Holder Sapphire S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Raspberry PI Camera for Sapphire S and Pro Print as displayed. Only camera holder and beam need support.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 151
- Wydruki
- 0
- Wyświetlenia
- 1554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder for Raspberry PI Camera for Sapphire S and Pro
Print as displayed. Only camera holder and beam need support.
Print instructions
Print everything as in the STL
The beam is printed straight up so a brim can used to hold it better to the bed. It also needs support from the bed.
The holder for the PI camera is also printed with support from the bed.
When you mount the Camera holder to the beam take care when pushing in the ball mount to the holder otherwise it will break. Hold the ball between your fingers when pushed in with force. Don't hold the beam and push it in.