1 / 2
Spacers for tightening the Falcam F22 dual quick-release monitor mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to replace the too thin spacers in the Falcam monitor mount
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
I recently bought a Falcam monitor mount for my Atomos Ninja and noticed a very loose pan or swivel axis. These spacers can be used to replace the too thin spacers. I printed 3 sizes: 1mm, 1.1mm, and 1.2mm. You need two spacers.
For me the 1mm ones (measured 1.1mm after printing) worked fine.