PLOTTER - PEN HOLDER FOR CR-10 V2 / V3 - V.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLOTTER - PEN HOLDER FOR CR-10 V2 / V3 - V.1 - snaps in place
- Ocena
- 2 / 5
- Polubienia
- 14
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 979
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
CR-10 V2 / V3 Pen plotter attachment.
Remixed from my universal mount that clips onto the face of any stock CR-10 V2 / V3
it comes on and off in seconds, ideal for a pen plotter
the pen is secured with a M3 screw and bolt
the plotter is specifically designed so that the pen can overhang the bed at Home position
so you can home the printer with pen mounted and it won't hit the bed
the holder gives just enough flex to allow 1-2mm travel on the pen.
for more info about setting up the ofsets and using the plotter try this link as a starting point
https://urish.medium.com/how-to-turn-your-3d-printer-into-a-plotter-in-one-hour-d6fe14559f1a
Printing
Print on its longest side, no supports, variable layer height
1hr30