1 / 5
Diaclone DA-14 / DA-33 Big Powered GV Knee Clip / Clamp — zdjęcie 1
1 / 5

Diaclone DA-14 / DA-33 Big Powered GV Knee Clip / Clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a clip to repair a broken toy. Diaclone Big Powered GV has notoriously difficult to remove lower legs.

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
411
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Diaclone Reboot Big Powered GV has notoriously difficult to remove lower legs.  This replacement clip can reduce the force required to unclip the legs, or replace a broken clip.

Recommend printing in ABS or ASA.  Support the clip as indicated in the 2nd or 3rd screenshot. Preferred orientation is on a 45 by reducing the X-Y Separation setting from 80% to something that can print for you.  I used 25%. (https://help.prusa3d.com/article/support-material_1698#xy-separation-between-an-object-and-its-support) .  If you don't have any luck, print with the U shape on the XY plane.  The tabs should still be strong enough even with layer lines.

Use a small file to sharpen the clip tabs and remove any elephant's foot around the base.

Tagi