Miter Rail For Ryobi Table Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Let's face it, the miter slots on the Ryobi Table saw are bad, other than that, great saw for the price. This is a…
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 270
- Wydruki
- 1
- Wyświetlenia
- 1280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Let's face it, the miter slots on the Ryobi Table saw are bad, other than that, great saw for the price. This is a group of files that that help improve the miter track. First off is the miter rails, there is one with the arrow and holes already laid out for the miter gauge that comes with the saw and another that is solid. On my saw these slide easily with no wiggle. There is also a handle that has an inset for a #8 nut.
My print bed can only produce 8 inches in length. I like a longer rail so the rails will dovetail together.
If you need the design to make a custom rail, here is a onShape link.
Print Settings
Printer:
Monoprice Ultimate
Rafts:
No
Supports:
Doesn't Matter
Infill:
30%
Notes:
Its a shop tool, quality doesn't really matter. I printed the handle in the orientation that i planned on using it so that all sides are fairly smooth without sanding.
Post-Printing
Assembly
Multiple tracks can dovetail together to get whatever size you want. I used a #8 3 inch screw epoxied into the bottom of the rail and the corresponding nut epoxied into the handle.
Category: Machine Tools