Hole Punch Template for Prusa RC3 Face Shield 4 Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Includes two separate sets of templates for cutting out face shields for the Prusa RC3 Face Shield.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Includes two separate sets of templates for cutting out face shields for the Prusa RC3 Face Shield. One template is for a standard single hole punch and one for a square single hole punch. I recommend the square type, otherwise you'll need to put the template right at the edge of the table to use the standard type. It's designed to do two hole punches at each slot to get the same oval shape as the drawing for the face shield by Prusa. I also included the same radius on the corners of the template to scribe onto the face masks. I use these for 8 mil letter size binder covers. The square type punch can do around 4-6 sheets thick at a time. Can do up to 8 sheets at a time if you put some good force to it.
Print instructions
PLA
With supports on build plate
15% gyroid infill