1 / 7
Horizontal Gear Meade DS-2114 AT-TC — zdjęcie 1
1 / 7

Horizontal Gear Meade DS-2114 AT-TC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've created this thing to substitute the horizontal movement gear of my Meade DS-2114 AT-TC telescope. Only the…

Ocena
0 / 5
Polubienia
7
Pobrania
39
Wydruki
0
Wyświetlenia
292
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I've created this thing to substitute the horizontal movement gear of my Meade DS-2114 AT-TC telescope.

Only the locking black part broke, but it uses a really thin thread, so I decided to create a part that would substitute the gear and all the related parts.

The part was created on FreeCAD and the original file is here as well, if someone needs it to adapt to a different telescope.

The Gear part itself was adjusted on OpenSCAD, remixed from this thing: http://www.thingiverse.com/thing:1516585

I had to use supports to print it, and decided to use Autodesk Meshmixer to create them. The stl file with supports is here, too.

I've Printed it with PLA, with 40% infill, and it got really sturdy.

If you print it, please post a picture.

If you remix it, or create a new thing from my FreeCAD file, please mention my work.

Print Settings

Printer:

Voolt3D Gi3

Supports:

Yes

Infill:

more than 40%

Filament:

Any PLA

Any Color

Category: Replacement Parts

Tagi