Anycubic Kobra Higher Feet Vibration Dampening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This are remixed (completely new designed, except the Dimension of the Rails) Anti-Vibration Feet to fit in larger…
- Ocena
- 4,5 / 5
- Polubienia
- 34
- Pobrania
- 223
- Wydruki
- 3
- Wyświetlenia
- 1445
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This are remixed (completely new designed, except the Dimension of the Rails) Anti-Vibration Feet to fit in larger Fans for the PSU and Motherboard. They feature different angles and Material strengths to eliminate different Vibration frequencies.
I designed them to elevate the printer enough, to fit in Noctua 80x25mm fans for the motherboard and the PSU.
For this, i used the common printable PSU and Motherboard covers and stretched them by around 20mm hight to fit for the 80x25mm fans (without stretching, they will collide with the motherboard or the PSU Caps.
Don't forget to connect the Step-Down-Module between the Fan and the 24V!
With all this set up, the only thing hearable is the Blower fan of the Printhead, the retractions and the Stepper Motors :)
The other Links for the Covers:
Motherboard: https://www.thingiverse.com/thing:5531168
Print Settings
Printer:
Anycubic Kobra
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
30% Gyroid
Filament:
Anycubic PLA
Black
Category: 3D Printer Parts