Drill Template Cabinet Door Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill Template Cabinet Door Hinge
- Ocena
- 5 / 5
- Polubienia
- 264
- Pobrania
- 1182
- Wydruki
- 5
- Wyświetlenia
- 6177
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Drill Template for Cabinet Door Hinge installation. This has the top and bottom templates. Template for a half inch reveal as the hinges are bought for that specific dimension.
Drill holes ½" (12mm) deep, 1 3/8" (35 mm) diameter. Look at images for a diagram.
The hinge installs 2 inches from the top or bottom edge of the door giving you enough room to attach other side of hinge to the door cabinet.
I added a Fusion file with parameters so these dimensions can be easily adapted to your hinges.
Note: I hold the template on the corner by hand and use a centering bit to drill the two small holes. I then screw the templates down with the two screws supplied for the hinge. I drill the large hole on the drill press. I have found this way it’s much easier to not drill into the template as much and it lasts much longer before you have to print a new one.