1 / 1
Moza Racing Kyostar Pogo Pin Power Fitment — zdjęcie 1

Moza Racing Kyostar Pogo Pin Power Fitment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For the Moza Wheelbases, to get power into a Kyostar Quick Release

Ocena
0 / 5
Polubienia
8
Pobrania
35
Wydruki
0
Wyświetlenia
1190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Used to get power from the 12v pads on the Moza wheelbases, I used the screws, springs and nut from the horn connector on the Kyostar through the holes to face the pads.

 

I then cut an old pen spring in half, soldered that to a red and black wire each, and with the spring on the nut side, routed through and screwed into the quick release.

 

Will upload additional photos for information later.