spiggytech chassis for ASRock X300TM-ITX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
complete 3D printed chassis for ASRock X300TM-ITX
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model has been discontinued from development. A new design can be found here.
Designed it from the ground up. This project is a work in progress
At Sub3L, this is a 3D Printed complete chassis for the ASRock X300TM-ITX. The cooler height is <47mm and was intended to fit the Thermalright AXP-90 x47
Required hardware:
- Screws are 3mm non-anchored for expedience
- USB headers
- 12mm Power Switch
The top HDMI port is designed for an Amazon Basics HDMI. Please keep this in mind when trying to fit a fat HDMI into the top port.
Before I got my hands on the board, I had to figure out the dimensions by using ASRock's stock photos and using math to figure out approximate distances.
If you have any questions or comments, please let me know. I'd love to hear from you.