Ryobi(and other) Blower/Trimmer Carburetor Adjustment Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In this publishing I have included stls for 2 designs for the Carburetor adjustment tool. I used a Ryobi R09050 blower…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 242
- Wydruki
- 2
- Wyświetlenia
- 1007
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
In this publishing I have included stls for 2 designs for the Carburetor adjustment tool. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in any way you see fit. I reccomend a 0.4mm nozzle as the shank thickness is 0.4mm. The top of the tool is marked so you can see the index of the adjustment. I also have knobs that you can put on the carb with scredriver slot available here: https://www.thingiverse.com/thing:5575588
https://www.printables.com/model/298928
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Filament:
3D Fuel Pro PLA PLA+
Notes:
I had the best luck printing with the business end up, to prevent elephants foot interference on the toolhead, but had success printing in either orientation on a PEI build plate.
Category: Hand Tools