Gear for a kodamatic 960 instant camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printed gear for a kodamatic 960 , this gear usually its pretty weak and breaks easily so made a new one…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3d printed gear for a kodamatic 960 , this gear usually its pretty weak and breaks easily so made a new one this will also work on other kodamatic cameras but i only have tested it on 960 and 970 (i think).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12
Infill:
100
Filament: Any used pla but guess other will work any Post-Printing =============
clean up
If your printer is not 100 printing great like mine you may need to clean some of the teeth of the gear.
Category: 3D Printing