1 / 4
Kotto Soldering Fume extractor 150x100mm intake
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the stock 100x55mm intake with a more effective, larger and quieter intake.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (27)Powiązane
Update: I’ve released an improved, but slightly smaller, version (see remix section).
I found the stock 100x55mm Kotto intake to be noisy (made a whistling noise) and not very effective. So I designed a 150x100mm Intake which makes a huge improvement to the system, both in performance and noise.
This model can be printed in PLA without supports - I just used a 5mm brim to keep it stuck to my smooth PEI bed (see pics).
PS, It is an intentionally tight fit to the flexible duct.