1 / 1
Intake filter for shrimp and fry for Fluval 107 and 207 Canister Filter — zdjęcie 1

Intake filter for shrimp and fry for Fluval 107 and 207 Canister Filter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It prevents most fry and shrimp from being sucked in the filter. The pipe it fits on 17.5mm OD. Could fit other filters.

Ocena
5 / 5
Polubienia
30
Pobrania
392
Wydruki
0
Wyświetlenia
1920
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

I have shrimp in most of my tanks and have to filter the intake of my Fluval 107 and 207 canister filters to prevent shimp and fry getting sucked in the filter. I designed this because I was tired of dealing with a sponge other the stock intake, which was very difficult to take off without dumping its content all over the tank.

I did not test it long term yet and will upload future iterations if I choose to improve it further. 

I have printed many of these, in PETG, without any need for support. 

 

The stock Fluval suction cup won't fit the bigger intake, so I included a longer version. 

Tagi