Insulin case for two 10ml bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds two 10ml bottles with a diameter of 23 milimeters.
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 404
- Wydruki
- 5
- Wyświetlenia
- 1950
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Press fit two 5mm x 5mm magnets in the hole in the center. Mind polarity.
If your printer's calibration is a bit off, you can glue those in place if the hole is too big, or drill them out with a 5mm drill if the hole is too small.
I do not use insulin myself. Any feedback on how to improve this model from the people who actually use it, is much apreciated.
There are multiple bodies in the STEP and STL file. Split them up before printing.
I included separate TOP and BOTTOM STL files for your convenience.
Update: 2025-05-09
There is now a “With cap” variant that fits the bottles with the plastic vial cover on it. I have no bottles to test it with, so if you print this one, please report back if this fits well or not 😅.