Mounting Clip for Malolo's Raspberry Pi 3 and 4 Cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting clip to attach Malolo's Raspberry Pi 3 and 4 cases to LACK enclosure, wall, etc. Fusion 360 file included.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 73
- Wydruki
- 4
- Wyświetlenia
- 473
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting clip to attach either the Pi 3 or Pi 4 versions of Malolo's excellent cases to the outside of a LACK enclosure or other mounting surface.
It has two drill holes sized for #8 (4mm) flat-head screws. The clip is by design a somewhat loose fit so it doesn't require a perfectly tuned printer. If desired, simply scale it by a percent up or down in the slicer for a tighter or looser fit.
I recommend printing it in PETG, with 3 perimeters, 0.2mm layer height, 20% gyroid infill, and paint on support for the side clips. Do NOT use the Arachne perimeter generator algorithm in Prusaslicer 2.5!!! Use Classic instead. Preconfigured .3mf file is provided.
Fusion .f3d file included.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.