Adjustable motorcycle clutch/brake lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits length-adjustable aftermarket levers.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 110
- Wydruki
- 2
- Wyświetlenia
- 2596
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
DISCLAIMER:
I am not responsible for any damages done to you or your bike. I had this original piece fall off and I could still ride my motorcycle just fine without it! It only bothered me that the handle was short and didn't have a bump at the end to prevent hand from slipping off.
This is a replacement part for the handle piece of the length-adjustable motorcycle lever which can be found in many online store.
I had my metal handle fall out while riding due to them not putting any thread lock on, and after searching the road up and down I couldn't find it.
I have been using the printed version for more than two years now with only one reprint (had it in black color and the sun made it bend a bit due to high heats, but the second white version in PET seems to be holding up just fine. Plus I always keep a spare set under my seat with the appropriate bolt.
This model is here to help anyone that had their piece fall off so they don't have to design it themselves.
I recommend printing it in PET or ASA.