Sorry We're Dead Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this from scratch in Fusion as the original had fuzzy edges, and I also wanted some mount holes for hanging.
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 210
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this from scratch in Fusion as the original had fuzzy edges when viewing in my slicer, and I also wanted some mount holes for hanging. I've rounded the corners too and it's generally a bit larger at 200mm x 150mm (good for an Ender 3 V2 anyway).
You should find that, if printing at 0.2 with an 0.2 layer height, your base/background colour should end around layer 15, secondary colour ends around layer 20, and the then run your top colour (on the ‘sorry’ and outer frame) after that (but check in your slicer).
GIF from maker Teque5:
