1 / 2
R2D2 Gear Cover for Mr. Baddeley's Mk3 foot drive
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification to the motor bracket cover designed by Mr Baddeley.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)Powiązane
This is a modification to the motor bracket cover designed by Mr. Baddeley.
I have changed this to allow you to bolt the middle gear into place instead of using the printed gear pin.
Designed to hold a 6m x 45mm bolt. Push the bolt into the bracket and put a nut on the outside of the frame to secure.
