TS100 Soldering Iron Case & Tip Holder Remix for PLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Started from the very smart design by AustinSaintAubin https://www.thingiverse.com/thing:2745774 I have done the…
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Started from the very smart design by AustinSaintAubin https://www.thingiverse.com/thing:2745774
I have done the following modifications:
Reduced 4x2mm magnet seat in order to reduce clearance and avoid super glue
Reduced hinge pin seat size to better fit 1.75 mm filament as pin
Reduced Soldering Iron mount clips interfefence (It was too high for PLA material)
Revised Allen Key mount
Incresed hole diameter for spare bolts
Redesigned Soldering Tip clip on the Top enclosure (more flexible design for PLA material)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: Sunlu PLA + Balck
Notes:
For better results I have used supports, but in general it can be printed without supports.
Category: Tool Holders & Boxes