CardDrive - USB Drive in Your Wallet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a USB drive in a thin enough form that is able to fit in many wallet credit card slots.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This USB drive holder is able to fit inside many different credit card slots in wallets. The card itself is significantly thicker than a standard credit card. However, in my experience, it is able to fit into most wallets, especially after the slot has adjusted to the size of the card.
The USB drive is only a small portion of the full card on rails inside of the print, and can be slid out of the card and used separately or can be slid back into the card in reverse to use as a whole piece.
The USB drive I used to make this was the one linked below, and I pulled the spinning part off. There is a small hole on the back of the drive housing that can fit something into it to pry the casing open, then the drive can be removed and added into the CardDrive housing.
https://www.amazon.com/gp/product/B085M2T1L9/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
This design is a work in progress, there are definitely some issues with it still that I am working out, but this current version does work, and I have been using it for the past two months or so without much issue. I am also working on a new version which will have multiple drives held in a single card.