Double Gear With 8 and 40 Teeth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this gear to hopefully make gear ratios easier to play with. Im currently printing it at slightly larger…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 745
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
I created this gear to hopefully make gear ratios easier to play with. Im currently printing it at slightly larger size to see if it will fit better with the original pieces. Either the piece is slightly small, my printer is slightly out of scale or it was because I printed on low quality/ had some filament over extrusion
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Resolution:
.28
Infill:
25
Filament: maths Pla red
Notes:
I added supports to the floating gear above, and printed slightly below build plate to increase the probability of it working
Category: Construction Toys