VESA Mount Adapter for AOC Monitors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixing AOC's weird design choice with a pillar mount by making it VESA compatible.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 216
- Wydruki
- 2
- Wyświetlenia
- 2163
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I have a cheap AOC monitor that uses a pillar into the stand to hold itself up, and has no VESA mounts. I am not wanting to replace it just yet so this is a solution to that problem.
You will want to have good layer adhesion to print it flat, as the stresses will be along layer lines which isn't super ideal but I didn't want to print it stood up.
It uses M4 nuts to go into the slots as that is the VESA standard.
I printed in PLA but PETG is probably a better option, 0.2mm layer thickness and 20% infill. I also increased perimeters to 3. You don't need supports I added a 0.2mm breakaway layer at the top of the screw holes.