1 / 7
T-Nuts Parkside 20V Battery X20V-Team Holder for ikea skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Holder for Parkside 20V Batteries
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 462
- Wydruki
- 2
- Wyświetlenia
- 2270
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (166)Powiązane
Just a simple screwed Battery holder für ikea skadis using T-Nuts.
Thanks for the inspiraton to this model and Fr3d.
There is one Version with T-Nuts Aligment Guide and one without.
I printed it with some supports as shown in the pictures.
What you need:
M2 T-Nut, M2 nuts and M2 12mm screws are needed for mounting.
The holder uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178.
For more Skadis add-ons, check out my other models ;-)