Eiffel Tower Lithophane - Flat/Curved for XY/ZX planes printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, I've been doing some tries with Eiffel Tower image doing these lithophanes. Results were fine so I'm sharing and…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, I've been doing some tries with Eiffel Tower image doing these lithophanes. Results were fine so I'm sharing and now I can do it with my peoples' images :D
For first and second (flat), use 0.2 layer height or smaller so they get enough definition. Be carefull with stringing.
For third and fourth (curved), use what you want. Just don't use abs because of the warping xD.
I personally like positives, negatives only work with light. Details look better in both verticals (curved). Happy printing and post makes/comments please))
Print Settings
Printer:
Geeetech prusa i3 proB
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
smartmaterials abs
ivory white
Notes:
Better If you don't use ABS, specially if you are going to curved models.
Using light behind them makes better effect.
How I Designed This
I used http://3dp.rocks/lithophane/ and an image from google, then played with parameters. Use images with high contrasts for better effect.
Category: Buildings & Structures