Heavy Circular Base Stand 50mm-diameter 15mm-height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this base for a model who needs some weight on base so it doesn't fall down. Its round for 50mm or smaller…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed this base for a model who needs some weight on base so it doesn't fall down. Its round for 50mm or smaller stuff and it's 15mm height.
I recommend round top solid layers for better looking.
Use infill depend on the weight that you need.
You can move model on Z axis from -15mm to 0 if you want slimmer base, the part of model under printing base won't be printed.
Print Settings
Printer:
Geeetech prusa i3 proB
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
0%-100%
Notes:
I recommend round top solid layers for better looking.
Use infill depend on the weight that you need.You can move model on Z axis from -15mm to 0 if you want slimmer base, the part of model under printing base won't be printed.
How I Designed This
I used Solidworks, I upload .part too.
Category: Other