Dampener for Anycubic Kossel Magnetic Effector/Arms 45mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
v1.3 Upgrade - I did 3 times thicker, to be stronger, totally fail. I need to change my mind. v1.2 Upgrade: - I…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
v1.3 Upgrade - I did 3 times thicker, to be stronger, totally fail. I need to change my mind.
v1.2 Upgrade: - I started design again so object is solid (easier to modify)
v1.1 Upgrade: -Boundaries are rounded with 0.4R
-Rotated 90º so it lays on bed.
I didn't find damper that fits with my magnetic effector so I designed mine. Distance betweern arms is 45mm. It fits good with my arms and I can scale to 1.05 or 0.95 if i need some force in any direction.
For any tip, problem or improvement just comment.
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
1
Filament: smartmaterials abs black How I Designed This ===================
I designed with Solidworks. I upload part file too if you want to change, or just tell me if you need any change))
Category: 3D Printer Parts