1 / 1
Monitor stand clamp-on microphone boom holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a way to mount my microphone boom from the vertical column of my monitor stand.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 114
- Wydruki
- 2
- Wyświetlenia
- 1540
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (44)Powiązane
I wanted a way to mount my microphone boom from the vertical column of my monitor stand. The vertical tube is 36mm in diameter so I made this clamp-on holder to fit.
You will need two #10 screws and nuts to make this work.
I printed this in PETG with 4-5 perimeters to make the holes stronger.
Print instructions
I printed this at 30% infill with 4-5 perimeters in PETG.