Toaster handle fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed and printed this model to fix a broken handle on my toaster. New life for the equipment :) .
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this model to fix my toaster broken handle, it's based on the original.
This is for the right side of the toaster, includes the support for the toaster locking mechanism. If you mirror it in the slicer should work fine for the left side too, i think!
Final version is made in Black ABS, settings used in Prusa Slicer (as seen in this post cover photo):
Layer Height= 0.3mm;
Filament= ABS;
Nozzle Temp=245 ºC;
Bed Temp =95ºC;
Infill= 65%;
Perimeters=8;
Supports On Build Plate only for the holes;
Note: a PETG clear one is presented in the photos, made as a prototype to check dimension accuracy.