360to280mm RAD Adapter FractalDesign Torrent

UPDATE 15.11.2013:
Check out the slim version to fit a bit bigger GPUs:
https://www.printables.com/de/model/648535-slim-fractaldesign-torrent-rad-adapter

It is designed to be mounted to a 280mm Radiator and then with long enougth screws through the front of the case and the fans into the radiator. The Adapter and fans will be mounted with those screws and the rad will be mounted to the radiator.

It is supposed to have 8 M4 threaded inserts so you can screw in and out safely.
If you are in the US, you should be able to use whatever imperial inserts are the similar size (the size used for case / radiator fans). Use the included short rad screws to screw in the adapter to the rad. The included long screws will NOT to fix the fans, as the 180mm fractal fans are 38mm long instead of 25mm.

The Second picture is only to show how it is supposed to line up! You need to mount the radiator first. Also you have to print it twice as you can see in the image.

Also Important: It is designed to work with a EKWB 280 D-RGB, it will only fit other AIOS if the 140mm fans are mounted directly next to each other! I can confirm that it will for example NOT work with the Corsair H110i GT 280 mm and likely not with other Corsair AiOs, since they have a gap between the 140mm fans. mounting patterns would need to be corrected for this to work, since it won't line up with the front fans otherwise and you would loose quiet a bit of pressure.

Update: I added a “Compatibility” version, it features slits to mount on the radiator, so you might be able to position it on other radiators in a way that it lines up with the two 180mm intake fans. It is currently untested, please comment if you got it working on a specific radiator, for others to see.

PLEASE confirm that the 140mm mounting pattern on your AIO is the same as the EKWB one I use! Otherwise you will just waste material.

Print with ABS, PLA will likely just melt away.