Tournament at Avalon insert for sleeved cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There is a great insert for Wizkid's "Tournament at Avalon" by SoberWhale, but it didn't fit my sleeved set. I had made
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 2
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is a great insert for Wizkid's "Tournament at Avalon" by SoberWhale, but it didn't fit my sleeved set. I had made a pair of deckholders before, so wanted something better. Modding was out of the question, so started from scratch in Tinkercad.
The sleeves I used were FFG's Tarot (orange) size. Your sleeves may be smaller or bigger.
Print Settings
Printer: Artillery Sidewinder X2 (0.4mm nozzle)
Rafts: No
Supports: No
Resolution: 0.28
Infill: 20%
Filament brand: Sunlu
Filament color: Grey
Filament material: PLA
Notes:
I use 'mouse ears' and a brim to keep the parts flat when printing. Although at 0.28mm layer height, I print slowly.