Magnetic Mount for Blazecut T050E Fire Suppression Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Braces to mount the Blazecut T050E fire suppression tube to the top of a PrusaBox using magnets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These braces are designed to mount a Blazecut T050E suppression tube to the inside top of a Prusabox enclosure using magnets. There are files for 8x4mm and 8x3mm magnets.
The magnets are a snug press fit. No glue should be needed, but some force is required to seat them. 2 magnets are required for each brace.
I printed using PETG. PLA would probably not be suitable due to heat.
Print as many as you need for your mounting place.
The STEP files are included should you want to remix for another mounting method (e.g. screws).