RV/Trailer Backup Camera Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket designed to mount a camera to the back of an RV/Enclosed Trailer
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 974
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
i needed a bracket to mount my backup camera to the back of my camper. This is designed to fit over the existing center light with the cover removed. You can then mount a replacement center light to the outside of the bracket. It uses the screws that hold the existing light to hold both the bracket and replacement light.
For power, I spliced into the light circuit so to power on the camera I just turn on the headlights on my truck.
I don’t remember what camera I have but it should work with a variety of different ones. Once everything was mounted, I sealed around all the edges to prevent water intrusion although this was designed so that I didn’t need to drill any holes.
Printed in 3D Solutech PLA with supports. I will see how long it lasts since my camper is Stored outside and this was printed in PLA.