New Sidepanels for Behringer QX1202USB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Behringer QX1202USB Sidepanels with cutout for a better heatsink.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When my Behringer QX1202USB broke because an electrolyte capacitor lost most of it's capacity, I not only replaced every electrolyte for the power supply but I also removed the tiny heatsink that was mounted directly below those capacitors. They were rated 85°C and had been run at roughly that temperature for some years.
To enable a larger heatsink to be mounted on the power regulators, I made new sidepanels and added a cutout to the right one.
The new sidepanels also make it possible to have the mixer stand on it's side.
I printed each side separately, in the silver PLA that came with my MK3S.
The model is built from multiple bodies (one of the first things I did with FreeCAD). Because the left side is a mirror of the right, both have the cutout in the FreeCAD file. See the screenshot for how to suppress the cutout if you want to re-export the sides from FreeCAD.