1 / 3
Lack Enclosure Filament Guide for eSun eBox Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament guide for enclosures based on IKEA Lack table for use with the eSun eBox Lite filament dryer
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 1539
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (2)Kolekcje (45)Powiązane
I wanted to mount an eSun eBox Lite filament dryer above my IKEA Lack table enclosure.
However it has a rather large tube (6mm OD) that would not fit the usual filament guides that are used with this enclosure. So I remodelled the filament guide to have an internal diameter of 6.5mm so the supplied tube can be used.
The outside diameter is 9.5mm so you may use a 9.5mm or 10mm drill bit for the filament guide hole.