Chainsaw Carburetor Air Valve Lever Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air valve lever arm for part #545070601 carburetor for Craftsman/Poulan/Husqvarna chainsaws.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 267
- Wydruki
- 0
- Wyświetlenia
- 1423
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
My chainsaw's carburetor has a secondary air inlet with its own valve plate. The lever in this model actuates that valve plate. A projection on the throttle linkage pushes this lever to open the valve plate at high speed.
While doing some maintenance on the saw, I noticed this part was cracked. I tried gluing the part, but it cracked in a second place when I put it back on. This part does not seem to be available for sale, buying a new carburetor is the only solution.
I made the outer perimeter as close to the original part as possible. I filled in the middle portion to make the model simpler. The part is so small, printing a solid part should not be an issue.
Consider the temperature stability and resistance to gasoline and oil when selecting the material for this part. I made it with PETG and used the saw for some moderate yard work without any issues.