Clean / Dirty Magnet for Dishwasher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon).
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 217
- Wydruki
- 4
- Wyświetlenia
- 1215
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon). The magnets are concealed within Base, kept in place by Casing. The "Clean" / "Dirty" letters snap into place (or glue them).
The tolerances are tight. If your calibration is off, you might have problems putting the letters into Base or putting Base into Casing.
See more of my designs at Thingiverse https://www.thingiverse.com/DorffMeister/about
Print instructions
CA glue (or insert) magnets into Base. CA glue Casing onto Base to conceal the magnets. Snap the letters into place (CA glue of necessary).