1 / 3
MUJI Aluminum Fountain Pen Teeny Body — zdjęcie 1
1 / 3

MUJI Aluminum Fountain Pen Teeny Body

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement body to turn your MUJI Aluminum fountain pen into a pocket pen,

Ocena
0 / 5
Polubienia
17
Pobrania
34
Wydruki
0
Wyświetlenia
775
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Do you have a MUJI Aluminum fountain pen and don't keep an extra cartridge in the body? Why not turn it into a pocket pen?!

This part is super tiny, so tolerances were tough. I printed it at .1mm layer height, supports on the bottom part (supports not needed for ink window), 15% infill, and 5mm brim just in case. That works for me. The biggest issue is the nub you use to post the cap. You may need to change it plus or minus .1mm. If you don't know how to use any 3d modeling software, reach out to me and I can help you out.

Tagi