Dual Adjustable Vertical Laptop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remixed https://www.thingiverse.com/thing:3418424 (single laptop stand) to a dual version (maybe triple?)
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 225
- Wydruki
- 3
- Wyświetlenia
- 2415
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
you will need a cr10 sized printer for the base, or try to split it up or resize if you like
I thought this laptop stand was great due to its sleek design with actual adjustability, other laptop stands say they are adjustable by resizing the print but id prefer to be able to have the slider rail with bolts to secure them as markst45 intended
i enlarged the base - and removed the cross section that contacts the dovetail pathway to allow full adjustability
i made the mounts shorter , and attempted to conjoin the mounts to create a double stand
you will need:
1 X base
2 x double mounts
4 x single mounts
6 m5 x15mm screws, use a drill and work some threads into them. hold the laptops in desired place and snug all the bolts down so the stands are tight on the dovetail
i did not use supports for the double mounts, i had to print them standing upright and my printer was able to bridge the gap. all my stands were printed at 101% size so that helps with the defects that come with a long bridge like this.
the single mounts i layed on their backs and they were easier to print
Print Settings
Printer brand:
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Filament brand:
Filament color:
black
Filament material:
pla
Notes:
i resized the stands to 101% due to using 3 printers i prefer to have all the parts fit loosely since the bolts tighten it down anyways