Action Camera Headrest Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created an action camera mount for my Sony action cam. Things you need to purchase: 1) One: 3/4" PVC SCH-40 pipe. Mine…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 683
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Created an action camera mount for my Sony action cam.
Things you need to purchase:
One: 3/4" PVC SCH-40 pipe. Mine had a 1.055" OD and 0.80" ID
Four: 1/4-20 x 2.5" hex bolts
Four: 1/4-20 nuts
Swivel camera head. Mine happen to come with M4 thread to mount so i bought a M4x20 hex bolt to thread it on.
The "Flat Bracket" and the "Inside Washer" need holes drilled in them afterwards for the threaded portion of the screw. Didn't have a good way to get those holes in there without supports.
Most of the STL's will probably have to be flipped around before printing. Just use your wisdom for orientation :P
Bolts and nuts press fit into the parts. Oh, and the posts for my headrest measured 14mm in diameter. Other than that, just drill holes where necessary, mount, and go!
**Update: created another way to hold a Sony Action Cam http://www.thingiverse.com/thing:1320725
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2 and .3mm
Infill:
50%
Notes:
flip STL to print correctly.
Post-Printing
Drill holes
Category: Camera